SUMMARY -- RE: Dead SS20 :(

Chan Cao (ccao@exapps.com)
Tue, 20 Jan 1998 23:10:41 -0500

Hi all.

Thanks everyone for the speedy responses.

I am settled with 448MB for now. I was able to use up
to 7 slots of 64MB each, including the one of the two
labeled VSIMM for Video SIMM. I found out that the
SS20 is a headless machine. My machine got a video
card installed.

The last 2 slots are reserved for VSIMM is one wants to
use the built-in graphics adapter.

I'm still trying to figure out whether I can use the 7th
slot to have a total of 512MB. There are quite many
references that I should be able to upgrade this server
to 512MB. So far, I'm still short of the goal.

C

> -----Original Message-----
> From: Chan Cao [SMTP:ccao@exapps.com]
> Sent: Tuesday, January 20, 1998 9:51 PM
> To: Chan Cao; sun-managers@ra.mcs.anl.gov
> Subject: Third Revision! RE: UPDATE -- RE: Dead SS20 :(
>
> I'm happier as of this writing! I put the mem in starting
> from the slot closest to the front of the sys. I got 6 of
> 'em 64MB in and the sys came up fine with 384MB.
>
> The last 2 slots won't accept the other 64MB's. This
> MB is weird; the last two slots are labeled VSIMM.
> It has an extension to the regular length slots. It's
> like the EISA extension of ISA bus. Hmmm...
>
> Any help?
>
> Thanks all in advance!
>
> C
>
> > -----Original Message-----
> > From: Chan Cao
> > Sent: Tuesday, January 20, 1998 8:50 PM
> > To: Chan Cao; 'sun-managers@ra.mcs.anl.gov'
> > Subject: UPDATE -- RE: Dead SS20 :(
> >
> > I connected a WYSE term to the A/B Ser. port and now seeing that
> > the system is doing Power On Self Test. Hmmm...How do I disable
> > that, or if i can from the WYSE is the next question.
> >
> > Thanks all in advance!
> >
> > C
> >
> > -----Original Message-----
> > From: Chan Cao
> > Sent: Tuesday, January 20, 1998 8:04 PM
> > To: 'sun-managers@ra.mcs.anl.gov'
> > Subject: Dead SS20 :(
> >
> > Anyone out there?
> >
> > I have an SS20 Model 71. I tried to upgrade it to 512MB but the
> >
> > machine won't come up. I put the old MEM back but it doesn't
> > come
> > back either. :(
> >
> > No MEM test, screen on powersave mode. Reseated Video port,
> > reseated mouse, reseated kb. No luck.
> >
> > Please help!
> >
> > Thanks.
> >
> >